Difference between revisions of "Main Page"

From WikiPixie
Jump to: navigation, search
(PixiePro Beginners Guide)
(PixiePro Beginners Guide)
Line 43: Line 43:
* Introduction to Linux and CLI
* Introduction to Linux and CLI
* [[ RemoteAccess  | Remote Access ]]  
* [[ RemoteAccess  | Remote Access ]]  
* [[KODI  | The only piece of hardware you need to run Kodi ]]  
** [[KODI  | The only piece of hardware you need to run Kodi ]]  
** Bring your wireless shares with you
** Stream audio via Wi-Fi
*  [[X11  | PixiePro as a Desktop computer ]]   
*  [[X11  | PixiePro as a Desktop computer ]]   
* Full speed retrogaming
* Full speed retrogaming

Revision as of 18:10, 29 December 2015

If you need information about the PixiePre, visit this wiki

Welcome to the PixiePro Wiki

PixiePro is a single-board computer where you can evaluate the performance and flexibility of NXP’s i.MX6Q Application processor along with high-end wireless interfaces. PixiePro is a single-board computer small enough to hold in your palm, yet powerful enough to perform as a server. With 4 ARM® Cortex™-A9 cores running at 1.0 GHz, plus 2D and 3D GPUs and an embedded 2GB 64-bit DDR3 RAM, PixieBoard is capable of running rich multimedia applications, embedded web servers, digital entertainment systems, industrial control systems, high definition video and anything you can imagine.

With ready-to-go state of the art wireless interfaces, PixiePro offers the highest available throughput. It offers both a high bandwidth WiFi 802.11b/g/n/ac, Bluetooth® 4.2 (w/BLE), 2.1 + EDR, NFC, GPS, and Mobile Broadband interfaces to enable any connectivity scenario you encounter. With PixiePro, streaming and wireless connectivity will never be an issue.

At only 2” by 3.5” (52mm x 91 mm), PixiePro easily gets you connected wirelessly or through the smallest, yet most resilient connectors. It includes 2 USB Type-A port and 1 micro USB port (OTG), 1 micro HDMI output, 2 micro SD slots and a 3.5mm line out / mini TOSLINK® optical port. If that wasn’t enough, it also provides Gigabit Ethernet, PCIe x1, SDIO, 2 MIPI, SATA-II, RGB666, USB 2.0 HS, CAN, SPI, 2 UART, 2 I2C and several GPIOs in board-to-board connectors so you can create your own daughter card to get your PixiePro even farther.

PixiePro was conceived to be a powerful computing machine with enough integrated peripherals to accommodate most applications, but without any of the extra clutter found in common reference platforms.

PixiePro Perspective1.jpg

PixiePro Logo.png

PixiePro Beginners Guide

Very First Start

  • PixiePro Out of the Box Experience Setup (OBeS).

You just got PixiePro up and running. Now what?

Archlinux ARM

  • Installing Archlinux ARM PixiePro

Hardware & Peripherals

  • Expansion Boards
  • Serial Port connection instructions
  • GPIO Interface
  • Pin Multiplexing

Technical Info

Advanced Linux Setup

  • PixiePro Yocto Layer
  • Updating the Linux kernel on PixiePro
  • Building the Linux kernel on PixiePro
  • Configuring the Linux kernel on PixiePro
  • Applying patches to the Linux kernel on PixiePro

Resources and Support

Need more information?

  • Archlinux distribution has an extensive documentation. For additional information visit the following link:

Previous Main Page